AB Night Vision | MGA – MANUAL GAIN ARTICULATING HOUSING

HOUSING KIT ONLY. NO INTENSIFIER TUBES INCLUDED! Only Housing and Optics.

The AB Night Vision MGA is an extremely tough, full-featured night vision binocular that incorporates the proven features of our RNVG-A housing while adding manual gain control. The housing is billet machined from 7075 alloy aluminum and designed to handle challenging real-world conditions.

During testing, the housings far exceeded military requirements of MIL-STD-810H drop testing, surviving impacts onto concrete from heights beyond the tolerances of lenses and image intensifier tubes.

We invite you to check out their Instagram for an inside look at the extreme testing our units go through.

The unit features a rotary switch for power that also serves as manual gain adjustment. The IR Illuminator is activated by a push-button switch. Indicators in the viewing area alert the user if the IR illuminator is on or if the unit senses a low battery condition. The unit is powered by an onboard 123 battery or auxiliary power from a battery pack using a 4-pin LEMO-style connector.

The articulating design allows the user to quickly adjust for an Interpupillary Distance from 47mm to over 80mm. Each optical pod can be rotated up out of the user’s view as desired, freeing one or both eyes for natural sight as conditions demand. When the goggle is helmet mounted and in the stowed position, the optical pods can be folded back flat against the helmet to minimize neck strain and better protect the goggle and the user from impacting overhead objects. The optical pods automatically turn off when articulated up. This feature prevents illumination on your helmet when one side is articulated up and ensures that the image intensifiers are ‘off’ in the stowed position with the optical pods folded back against the helmet. The force required to swing the optical pods is user adjustable using the included custom Pivot Spanner Tools or a coin.

Assembly of the MGA does not require the removal of the flex cables from the image tube, preserving your tube’s warranty. Also, the design does not require the flex to twist or crimp during assembly, further preventing damage.

The goggles are available in Flat Black and Flat Dark Earth. The components of the binocular are media blasted to give a non-reflective matte finish, then black anodized for durability. For the FDE option, Cerakote, a proven firearms finish, is applied over the anodizing to give a tough, attractive finish.

Features:

7075 Aluminum constructions
Articulating pods
Individual pod shut off
Onboard IR illuminator
Waterproof
Approximately 30 hours of battery life on a CR123 battery
LEMO Battery Port

Due to constant rotating inventory, not all intensifier tubes are listed. Please contact us if you don't see tubes with the specs you need

Only Carson/Noctis optics on our build unless otherwise specified

Colors may vary in photos but tubes are all the same color

What's Included

MGA Housing
Mil-Spec Optics

Specifications

POWER SOURCE: (1) CR123 size battery
FOCUS RANGE: 9.8” to infinity
OPERATION TIME: Approximately 30 hours with onboard CR123
MAGNIFICATION: (1X) ONE POWER
FIELD OF VIEW: 40 Degrees with standard Mil-spec optics
INTERPUPILLARY ADJUSTMENT: 47mm to over 80mm
DIOPTER ADJUSTMENT: -6 TO +2
GAIN: Manually adjustable
WEIGHT: 210g housing, 580g (20.45oz) with standard Mil-spec optics, L3 tubes, and no battery. 492g (17.35oz) with RPO 3.0 lenses
DIMENSIONS: 4.14” X 4.2” X 3.5”
IR ILLUMINATOR: Built-in
WATER RESISTANCE: Submersible to 66ft
IR LED & LOW BATTERY INDICATORS: Yes
INTENSIFIER TUBES: Compatible with MX-11769 style
OPTICS: Compatible with PVS-14 style eyepiece and objective and RPO 3.0 lenses.
WARRANTY: Lifetime on housing parts and service per policy. See website for more details.

Color: Black

$3,150.00 USD

Sale Sold out

Shipping calculated at checkout.

ITAR

ITAR COMPLIANCE AGREEMENT

I am a U.S. Citizen as defined in 22 CFR§ 120.15
I am purchasing the articles identified on the purchase order identified above for use or resale in the United States only.
- I understand that if the items are resold that it is my responsibility to advise the customer that the product is controlled for export by the appropriate U.S. Government Agency and that I am responsible to notify the customer if there are any export policy of denials associated with the product.
I understand that export authorization must be obtained from the Department of State before these items can be exported abroad or given to foreign persons in the United States.
I understand that, before applying for the appropriate export authorization that I must review and comply with any policy of denials associated with the items.
I understand that the products, technologies and services listed on the attached purchase order are subject to the export control laws and regulations of the U.S. Government and that they fall under the control jurisdiction of the Department of State’s International Traffic in Arms Regulations (ITAR).
I understand that it is unlawful to export, or attempt to export or otherwise transfer or sell any hardware or technical data or furnish any service to any foreign person (as defined in 22 CFR§ 120.16), whether abroad or in the United States, for which a license or written approval of the U.S. Government is required, without first obtaining the required license or written approval from the Department of the U.S. Government having jurisdiction.
I understand that I am responsible for compliance with any and all U.S. Government export controls and regulations and that, if I violate them, it could result upon conviction in severe criminal and civil penalties for my company and me.

ITAR COMPLIANCE AGREEMENT

I am a U.S. Citizen as defined in 22 CFR§ 120.15
I am purchasing the articles identified on the purchase order identified above for use or resale in the United States only.
- I understand that if the items are resold that it is my responsibility to advise the customer that the product is controlled for export by the appropriate U.S. Government Agency and that I am responsible to notify the customer if there are any export policy of denials associated with the product.
I understand that export authorization must be obtained from the Department of State before these items can be exported abroad or given to foreign persons in the United States.
I understand that, before applying for the appropriate export authorization that I must review and comply with any policy of denials associated with the items.
I understand that the products, technologies and services listed on the attached purchase order are subject to the export control laws and regulations of the U.S. Government and that they fall under the control jurisdiction of the Department of State’s International Traffic in Arms Regulations (ITAR).
I understand that it is unlawful to export, or attempt to export or otherwise transfer or sell any hardware or technical data or furnish any service to any foreign person (as defined in 22 CFR§ 120.16), whether abroad or in the United States, for which a license or written approval of the U.S. Government is required, without first obtaining the required license or written approval from the Department of the U.S. Government having jurisdiction.
I understand that I am responsible for compliance with any and all U.S. Government export controls and regulations and that, if I violate them, it could result upon conviction in severe criminal and civil penalties for my company and me.