Wilcox | RAID Xe Full Power
Wilcox | RAID Xe Full Power
The Wilcox RAID Xe™ High Power is the culmination of years of operator feedback and leading-edge technical advancements. The result is a compact, ergonomic aiming and illumination device with a uniquely rich feature set that achieves the highest standard of optical performance.
The RAID XE™ is, in our opinion, the most feature rich and best laser device on the market. With the ability to customize each function on the device itself for different lighting conditions makes it second to none. The ability to save your settings for working inside of a structure, or on approach to a structure, or for long range observations this laser can do it all. Boasting 2 very clear and uniform VCSEL IR illuminators for both medium & longer range applications, and a room IR Flood illuminator this laser can do all things well. Plus, the ability to adjust the power of the IR laser down lower than other lasers, gives a very fine aiming point while reducing the bloom that is common on higher powered lasers in the past.
Military and law enforcement operators face an array of unique challenges in low or no light environments where quick target acquisition and identification are required. The RAID Xe represents a complete, robust solution for any operator requiring a high degree of awareness, flexibility and accuracy to ensure mission success.
Features:
- Laser Type/Wavelength/Power*: Red Visible Laser/660nm/75mW Laser
Type/Wavelength/Power*: Green Visible Laser/520nm/12mW Laser Type/Wavelength/Power*: Infrared Laser/850nm/30mW Laser Type/Wavelength/Power*: Infrared Illuminator/ 840nm/min 50mW - One optical bench houses either red or green VIS laser, NIR laser and adjustable NIR VCSEL illuminator
- Adjustable NIR VCSEL illuminator and wide angle fixed NIR VCSEL Room illuminator project precise, speckle-free beams for extreme clarity and optimal combat identification
- Fixed NIR room illuminator provides 40º flood capability
- Optical bench is aligned to the weapon by one windage and one elevation adjustment
- Powered by one (1) CR123 3V battery providing approximately 8 hours of product usage at max settings
- Mounts to any 1913 Picatinny rail secured by 2 shock nuts
- Multi-function keypads provide flexibility in programing custom options
- Five (5) selectable pulse modes on VIS/NIR lasers settings
- On-the-fly laser brightness adjustment
- Security tethered loop tie down
- Remote port accepts Wilcox line of ERGOCTO® Xe Activation Keypads and ERGOCTO Xe Control Grips (optional)
- ERGOCTO Xe Activation Keypads provides three user defined functions regardless of switch position
What's Included
What's Included
- RAID XE LOW POWER
- Wilcox Case
- Detachable Front Cover
- Crane Junction Box
- Switch
- Lens Pen
Specifications
Specifications
- One optical bench houses a VIS laser (the eye safe is only offered in red visible) and NIR laser
- NIR VCSEL illuminator and wide angle NIR Room illuminator project precise, speckle-free beams for extreme clarity and optimal identification
- NIR room illuminator provides 40º flood capabilities
- Optical bench is aligned by one windage and one elevation adjustment
- Powered by one (1) CR123 3V battery
- Multi-function keypads provide flexibility in programing custom options
- Five (5) selectable pulse modes on VIS/NIR lasers settings
- Swappable junction box
Couldn't load pickup availability
ITAR
ITAR
ITAR COMPLIANCE AGREEMENT
- I am a U.S. Citizen as defined in 22 CFR§ 120.15
-
I am purchasing the articles identified on the purchase order identified above for use or resale in the United States only.
- I understand that if the items are resold that it is my responsibility to advise the customer that the product is controlled for export by the appropriate U.S. Government Agency and that I am responsible to notify the customer if there are any export policy of denials associated with the product.
- I understand that export authorization must be obtained from the Department of State before these items can be exported abroad or given to foreign persons in the United States.
- I understand that, before applying for the appropriate export authorization that I must review and comply with any policy of denials associated with the items.
- I understand that the products, technologies and services listed on the attached purchase order are subject to the export control laws and regulations of the U.S. Government and that they fall under the control jurisdiction of the Department of State’s International Traffic in Arms Regulations (ITAR).
- I understand that it is unlawful to export, or attempt to export or otherwise transfer or sell any hardware or technical data or furnish any service to any foreign person (as defined in 22 CFR§ 120.16), whether abroad or in the United States, for which a license or written approval of the U.S. Government is required, without first obtaining the required license or written approval from the Department of the U.S. Government having jurisdiction.
- I understand that I am responsible for compliance with any and all U.S. Government export controls and regulations and that, if I violate them, it could result upon conviction in severe criminal and civil penalties for my company and me.
ITAR COMPLIANCE AGREEMENT
- I am a U.S. Citizen as defined in 22 CFR§ 120.15
-
I am purchasing the articles identified on the purchase order identified above for use or resale in the United States only.
- I understand that if the items are resold that it is my responsibility to advise the customer that the product is controlled for export by the appropriate U.S. Government Agency and that I am responsible to notify the customer if there are any export policy of denials associated with the product.
- I understand that export authorization must be obtained from the Department of State before these items can be exported abroad or given to foreign persons in the United States.
- I understand that, before applying for the appropriate export authorization that I must review and comply with any policy of denials associated with the items.
- I understand that the products, technologies and services listed on the attached purchase order are subject to the export control laws and regulations of the U.S. Government and that they fall under the control jurisdiction of the Department of State’s International Traffic in Arms Regulations (ITAR).
- I understand that it is unlawful to export, or attempt to export or otherwise transfer or sell any hardware or technical data or furnish any service to any foreign person (as defined in 22 CFR§ 120.16), whether abroad or in the United States, for which a license or written approval of the U.S. Government is required, without first obtaining the required license or written approval from the Department of the U.S. Government having jurisdiction.
- I understand that I am responsible for compliance with any and all U.S. Government export controls and regulations and that, if I violate them, it could result upon conviction in severe criminal and civil penalties for my company and me.
Share








