RIX Tactical | RENV-B Gen2+ Enhanced Night Vision Binocular

The RENV-B Fusion night vision technology combines image intensification and thermal imaging to deliver superior situational awareness. This advanced system enables real-time target tracking and identification by reducing imaging delay, providing users with fast, accurate visuals.

Additionally, the system integrates digital information enhancement algorithms and thermal target display functions, enabling rapid recognition of potential threats, even in the most extreme environments. This technology is ideal for users requiring enhanced detection capabilities in low-light and challenging conditions.

Features:

Thermal & IIT Fusion Technology
- The RENV-B is equipped with a 640*512 thermal detector and two high-performance image intensifier tubes. The system integrates infrared and image intensification technology with minimal imaging delay, empowering real-time tracking and precise target identification.
Multiple Fusion Image Modes
- The RENV-B features a 0.6-inch full-color OLED display with 800x600 resolution, providing multiple enhance image modes, each designed for a specific purpose.
Bluetooth Remote Control
- The Bluetooth remote control allows the user to operate the RENV-B wirelessly within a certain distance without directly touching the night vision device itself. This greatly increases the ease of operation, especially in cases where hands are required to maintain other tasks or need to remain hidden.
Navigation & Positioning System
- Utilizing its integrated positioning system, like GPS, the RENV-B offers precise location data, a valuable asset for users navigating challenging landscapes or unfamiliar surroundings.
Long Working Time Battery Pack
- RIX has significantly boosted the RENV-B’s energy efficiency. Now, with its double 18650 batteries, it can operate for over 60 hours in night vision mode or 8 hours in fusion mode.
BSP
- Bright Source Protection
Illuminator
- Infrared
IP67
- Waterproof
Flip up
- Shut Off
Multiple Fusion
- Modes Switchable

Check out the Unboxing of the RENV-B!

What's Included

RENV-B Optic

Battery Module

Cable

Remote Control

Eye Cups

Protective Cover

Pouch

Specifications

Optics - Magnifacation, × - 1

Optics - Exit Pupil Diameter, mm - 14

Optics - Exit Pupil Distance, mm - 25

Optics - Adjustment, D - -3~+2

I2 - Generation - Gen 2+

I2 - Resolution, lp/mm - 64

I2 - FOV, ° - 40

I2 - Lens System, mm - f/1.2, 25

I2 - Range of Focus, yd - 0.27 to infinity

I2 - Brightness Control - Yes

I2 - Bright source protection - Yes

I2 - Infrared Illuminator - Built-in

Thermal Image - Type - VOx Uncooled

Thermal Image - Resolution, pixels - 640×512

Thermal Image - Pixel pitch, μm - 12

Thermal Image - NETD, mK - ＜30

Thermal Image - Frame Rate, Hz - 50

Thermal Image - Lens System, mm - f/1.1, 16

Thermal Image - FOV, ° - 25.8×19.1

Thermal Image - Brightness Control - Yes

Thermal Image - Polarity - White hot，Orange hot

Enhanced - Mode - Outline, Highlight, Breath

Sensor - Azimuth Indication - Yes

Display - Type - OLED

Display - Resolution, pixels - 800×600

Detection Range, m/yd - 1500m/1640yd

Degree of Protection, lP code - IP67

Operating Temperature Range, -F - -40 to 122

Battery Type - 18650×2

Operating Time on Battery Pack (at t=72°F) , h - Enhanced Display ≥ 8 hours，I2 up to 60 hours

Dimensions, inch - 4.2×4.5×3.3

Weight, lb - Main body:1.26Ib，Battery pack≤0.23Ib (without battery)

Tube Options 1800-2000 FOM WHITE PHOSPHOR 1400-1600 FOM WHITE PHOSPHOR

$10,999.00 USD

Sale Sold out

Shipping calculated at checkout.

ITAR

ITAR COMPLIANCE AGREEMENT

I am a U.S. Citizen as defined in 22 CFR§ 120.15
I am purchasing the articles identified on the purchase order identified above for use or resale in the United States only.
- I understand that if the items are resold that it is my responsibility to advise the customer that the product is controlled for export by the appropriate U.S. Government Agency and that I am responsible to notify the customer if there are any export policy of denials associated with the product.
I understand that export authorization must be obtained from the Department of State before these items can be exported abroad or given to foreign persons in the United States.
I understand that, before applying for the appropriate export authorization that I must review and comply with any policy of denials associated with the items.
I understand that the products, technologies and services listed on the attached purchase order are subject to the export control laws and regulations of the U.S. Government and that they fall under the control jurisdiction of the Department of State’s International Traffic in Arms Regulations (ITAR).
I understand that it is unlawful to export, or attempt to export or otherwise transfer or sell any hardware or technical data or furnish any service to any foreign person (as defined in 22 CFR§ 120.16), whether abroad or in the United States, for which a license or written approval of the U.S. Government is required, without first obtaining the required license or written approval from the Department of the U.S. Government having jurisdiction.
I understand that I am responsible for compliance with any and all U.S. Government export controls and regulations and that, if I violate them, it could result upon conviction in severe criminal and civil penalties for my company and me.

ITAR COMPLIANCE AGREEMENT

I am a U.S. Citizen as defined in 22 CFR§ 120.15
I am purchasing the articles identified on the purchase order identified above for use or resale in the United States only.
- I understand that if the items are resold that it is my responsibility to advise the customer that the product is controlled for export by the appropriate U.S. Government Agency and that I am responsible to notify the customer if there are any export policy of denials associated with the product.
I understand that export authorization must be obtained from the Department of State before these items can be exported abroad or given to foreign persons in the United States.
I understand that, before applying for the appropriate export authorization that I must review and comply with any policy of denials associated with the items.
I understand that the products, technologies and services listed on the attached purchase order are subject to the export control laws and regulations of the U.S. Government and that they fall under the control jurisdiction of the Department of State’s International Traffic in Arms Regulations (ITAR).
I understand that it is unlawful to export, or attempt to export or otherwise transfer or sell any hardware or technical data or furnish any service to any foreign person (as defined in 22 CFR§ 120.16), whether abroad or in the United States, for which a license or written approval of the U.S. Government is required, without first obtaining the required license or written approval from the Department of the U.S. Government having jurisdiction.
I understand that I am responsible for compliance with any and all U.S. Government export controls and regulations and that, if I violate them, it could result upon conviction in severe criminal and civil penalties for my company and me.