Noisefighters | AX14-PRO Night Vision Mount
Noisefighters | AX14-PRO Night Vision Mount
The Noisefighters AX14-PRO™ is a featherweight night vision monocular mounting arm for the PVS-14 and similar devices, produced with cutting edge manufacturing and material technologies. The AX14-PRO weighs only 0.9 oz / 26 g total, or approximately 52% less than a milspec J-Arm, yet it is significantly more rigid due to the unique design. Just attach a monocular, snap the complete assembly into an industry-standard dovetail helmet mount, and enjoy. An intuitive, friction-based mechanism allows users to swing the PVS-14 monocular in front of either the left or right eye and perfectly adjust for interpupillary distance.
The AX14-PRO is the successor to our original X14-Arm and includes a new, desirable feature: a knuckle is integrated into the arm which allows the entire monocular night vision mount to both swing away from the eye temporarily and, when not in use, tightly stow against the helmet, significantly lessening the chance for damage during movement under doorways or out of vehicles. This knuckle is supplemented with metal washers for smooth and consistent movements. To be clear, the articulating knuckle permits full range of motion and tight stowing on both the left and right side.
The mechanism is pretensioned at the factory and should never need to be adjusted, but a simple hex key wrench may be used for adjustment as necessary.
A slight rearward sweep of the inner arm helps position the monocular eyepiece closer to one’s eye and provides greater compatibility for those with larger helmets.
Multiple anti-rotation features prevent the monocular from rotating and loosening with vibrations.
The choice of a high performance polymer from Arkema® produces a nearly indestructible monocular mount. The highly impact-resistant material chosen for this Noisefighters J-arm should absorb shocks and bounce back into shape instead of fracturing when dropped, bent, or otherwise stressed.
All hardware on this PVS-14 articulating mount is made of genuine, passivated 316 stainless steel and mil spec anodized aluminum for the ultimate in salt water corrosion resistance. The AX14-PRO is truly maritime rated.
A tether (or dummy cord) attachment point is featured on the rear of the AX14-PRO to keep the entire PVS-14 articulating mount system secure.
A no-questions-asked, transferable lifetime warranty is included. The Noisefighters J-arm AX14-PRO is proudly made and assembled in the U.S.A. and was designed by a Marine Corps combat veteran of Iraq and Afghanistan.
- Noisefighters toughest and most versatile polymer arm for mounting a single AN/PVS-14
- Less than half the weight and significantly more stiff than a milspec J-Arm
- Includes our proprietary rotating knuckle that provides a tight stow against the helmet and also allows the monocular to be temporarily swung away from the eye
- Offers a slight rearward-swept monocular position for greater helmet compatibility
- Multiple anti-rotation features for improved AN/PVS-14 stability
- Reinforced joints with stainless steel washers for smoother movement
- A maritime-rated arm, with genuine 316 stainless steel and mil spec anodized aluminum hardware
- Requires a dovetail style helmet mount
What's Included
What's Included
Noisefighters AX14-PRO Lightweight Night Vision Monocular Mounting Arm
Specifications
Specifications
- HELMET MOUNTING COMPATIBILITY: DOVETAIL
- INTERPUPILLARY DISTANCE (IPD) COMPATIBILITY: 55 - 75mm
- MATERIALS USED: HIGH PERFORMANCE POLYMER FROM ARKEMA®; MIL SPEC ANODIZED ALUMINUM; 316 STAINLESS STEEL
- FINISH: BLACK
- TOTAL ASSEMBLED WEIGHT OF THIS PRODUCT: 0.9 OZ / 26 g
- DIMENSIONS: 3.5 x 1 x 1.25"
- WARRANTY: LIFETIME, TRANSFERABLE
Couldn't load pickup availability
ITAR
ITAR
ITAR COMPLIANCE AGREEMENT
- I am a U.S. Citizen as defined in 22 CFR§ 120.15
-
I am purchasing the articles identified on the purchase order identified above for use or resale in the United States only.
- I understand that if the items are resold that it is my responsibility to advise the customer that the product is controlled for export by the appropriate U.S. Government Agency and that I am responsible to notify the customer if there are any export policy of denials associated with the product.
- I understand that export authorization must be obtained from the Department of State before these items can be exported abroad or given to foreign persons in the United States.
- I understand that, before applying for the appropriate export authorization that I must review and comply with any policy of denials associated with the items.
- I understand that the products, technologies and services listed on the attached purchase order are subject to the export control laws and regulations of the U.S. Government and that they fall under the control jurisdiction of the Department of State’s International Traffic in Arms Regulations (ITAR).
- I understand that it is unlawful to export, or attempt to export or otherwise transfer or sell any hardware or technical data or furnish any service to any foreign person (as defined in 22 CFR§ 120.16), whether abroad or in the United States, for which a license or written approval of the U.S. Government is required, without first obtaining the required license or written approval from the Department of the U.S. Government having jurisdiction.
- I understand that I am responsible for compliance with any and all U.S. Government export controls and regulations and that, if I violate them, it could result upon conviction in severe criminal and civil penalties for my company and me.
ITAR COMPLIANCE AGREEMENT
- I am a U.S. Citizen as defined in 22 CFR§ 120.15
-
I am purchasing the articles identified on the purchase order identified above for use or resale in the United States only.
- I understand that if the items are resold that it is my responsibility to advise the customer that the product is controlled for export by the appropriate U.S. Government Agency and that I am responsible to notify the customer if there are any export policy of denials associated with the product.
- I understand that export authorization must be obtained from the Department of State before these items can be exported abroad or given to foreign persons in the United States.
- I understand that, before applying for the appropriate export authorization that I must review and comply with any policy of denials associated with the items.
- I understand that the products, technologies and services listed on the attached purchase order are subject to the export control laws and regulations of the U.S. Government and that they fall under the control jurisdiction of the Department of State’s International Traffic in Arms Regulations (ITAR).
- I understand that it is unlawful to export, or attempt to export or otherwise transfer or sell any hardware or technical data or furnish any service to any foreign person (as defined in 22 CFR§ 120.16), whether abroad or in the United States, for which a license or written approval of the U.S. Government is required, without first obtaining the required license or written approval from the Department of the U.S. Government having jurisdiction.
- I understand that I am responsible for compliance with any and all U.S. Government export controls and regulations and that, if I violate them, it could result upon conviction in severe criminal and civil penalties for my company and me.
Share
