Quad Defense | Helmet Stand
Quad Defense | Helmet Stand
Couldn't load pickup availability
QDEF // HELMET STORAGE & DISPLAY
SKULL
HELMET STAND
Your gear deserves better than the floor
The Quad Defense Skull Helmet Stand gives your helmet, night vision, and communications setup a dedicated place to live when it is not being worn.
Designed and produced in-house by Quad Defense, our original stand pairs the signature QDEF skull with heavy-duty construction, a wide base, and two adjustable height settings for storage and display.
01 // BUILT FOR YOUR SETUP
Give the whole system a home
Your helmet setup does not stop at the shell. The QDEF Helmet Stand is designed to support helmets equipped with night vision, mounts, communications, lights, strobes, battery packs, counterweights, and other helmet-mounted equipment.
Complete setup support
Keep your helmet and mounted equipment together, upright, organized, and accessible between uses.
Wide, stable base
Heavy-duty construction and a wide footprint provide a dedicated foundation for helmet storage and display.
Two height positions
Adjust the stand height to suit your helmet, mounted equipment, and available display space.
The signature skull
The original QDEF skull makes the stand part of the display, even when your helmet is off.
02 // ADJUSTABLE HEIGHT
Set the height for your gear
Two adjustable height positions let you change the stand's overall height to better accommodate different helmet sizes, night vision configurations, and display setups.
Run it lower for a compact presentation or raise it when your mounted equipment needs additional clearance.
03 // THE QDEF SKULL
Helmet off, skull out
The skull is what makes this stand unmistakably Quad Defense. Designed to look just as good on its own as it does underneath a fully configured helmet, it turns a practical piece of gear storage into part of the room.
Gear bench. Desk. Shelf. Nightstand. Team room. Give your setup a spot that looks like it belongs to you.
04 // STORAGE & DISPLAY
Keep the setup together
You put time into building your helmet system. Give it a dedicated place between uses instead of laying it across the bench or breaking it down every time.
Keep your helmet, NODs, mount, comms, and accessories together. Grab it when you need it. Put it back when you are done.
STAND ONLY
Helmet, night vision device, mount, communications, and other displayed equipment are not included.
DISPLAY SMART // COVER YOUR LENSES
Displaying your night vision? We recommend keeping the objective lenses covered—even indoors—with compatible QDEF Googly Eyes Day Caps or Bikini Lens Covers . Covers sold separately.
05 // PRODUCT DETAILS
The details
- Product
- Quad Defense Skull Helmet Stand
- Design
- Original QDEF skull with a wide, stable base
- Height adjustment
- Two adjustable positions
- Intended use
- Helmet storage, organization, and display
- Helmet compatibility
- Suitable for a wide range of tactical and ballistic helmets
- Production
- Designed and produced in-house by Quad Defense
- Country of manufacture
- USA
06 // MADE BY QDEF
From our shop to your gear room
The Skull Helmet Stand is an original Quad Defense product, designed and produced in-house in the USA . Built for people who spend too much time putting their setup together to hide it when they are done.
PRODUCTION TIME
Please allow approximately 3–4 days for production.
QDEF SUPPORT
Questions about your setup?
Tell us which helmet and mounted equipment you plan to display. We can help you determine whether the Skull Helmet Stand fits your setup.
Talk to Quad Defense →QUAD DEFENSE // SKULL HELMET STAND
Made in the USA
ENTER DARKNESS
ITAR
ITAR
QDEF COMPLIANCE // U.S. EXPORT CONTROL
Export &
ITAR Compliance
Certain products, components, technical data, and services offered by Quad Defense may be controlled under United States export-control laws and regulations.
These requirements may include the International Traffic in Arms Regulations (ITAR), the Export Administration Regulations (EAR), or other applicable U.S. laws and regulations.
Customers are responsible for understanding and complying with the export-control requirements applicable to the products or information they purchase, receive, transfer, resell, or otherwise provide to others.
Do not export, re-export, transfer, release, or provide controlled products, technical data, or services to a foreign person, foreign destination, or unauthorized end user without first determining whether U.S. Government authorization is required.
This includes transfers that may occur inside the United States when controlled technical data or other controlled items are released to a foreign person.
What Is ITAR?
The International Traffic in Arms Regulations are administered by the U.S. Department of State's Directorate of Defense Trade Controls (DDTC).
ITAR governs defense articles, defense services, and related technical data identified on the United States Munitions List, as well as certain exports, temporary imports, reexports, retransfers, and other controlled transactions.
Not every product sold by Quad Defense is necessarily ITAR-controlled. Export classification depends on the specific product, component, technology, technical data, and transaction.
Night Vision & Related Equipment
Night vision products and related equipment may be subject to U.S. export-control restrictions depending on their classification, configuration, technical characteristics, origin, and intended destination or end user.
Some products may fall under ITAR jurisdiction while others may be controlled under the Export Administration Regulations or another regulatory framework.
The absence of an “ITAR” label on a product page should not be interpreted as confirmation that the product is unrestricted for international transfer.
Who May Receive Controlled Items?
Export-control rules can restrict who may receive certain products, technical data, or defense services.
ITAR distinguishes between U.S. persons and foreign persons. The applicable regulatory definitions should be used when determining whether a particular transfer or release requires authorization.
Citizenship alone should not be used as the sole test for every export-control determination.
Authorization May Be Required
Depending on the item and circumstances, U.S. Government authorization may be required before a controlled product or technical data may be:
- Exported from the United States
- Re-exported from one foreign country to another
- Retransferred to a different end user or end use
- Released or provided to a foreign person
- Sold or transferred to another party for a different destination or purpose
- Used to furnish a controlled defense service
Applicable licenses, agreements, exemptions, exceptions, or other authorizations must be determined before the transaction occurs.
Resale Does Not Remove Export Restrictions
Purchasing a product from Quad Defense and later reselling or transferring it does not eliminate applicable U.S. export-control restrictions.
Customers who resell controlled products are responsible for ensuring that subsequent transfers comply with applicable export-control laws, end-user restrictions, destination restrictions, licensing requirements, and other regulatory obligations.
Where appropriate, downstream purchasers should also be informed that the product may be subject to U.S. export-control restrictions.
Technical Information May Also Be Controlled
Export controls may apply not only to physical hardware but also to certain technical information associated with controlled products.
Depending on its content and classification, controlled technical data may include certain detailed information relating to the design, development, production, manufacture, assembly, operation, repair, testing, maintenance, or modification of controlled defense articles.
Quad Defense may therefore limit the distribution of certain technical information or documentation when necessary to comply with applicable export-control obligations.
Purchaser Acknowledgment
By purchasing or receiving export-controlled products, technical data, or services from Quad Defense, the purchaser acknowledges responsibility for complying with applicable U.S. export-control laws and regulations.
I understand that certain products or technical information provided by Quad Defense may be subject to U.S. export-control laws and regulations.
I will not export, re-export, transfer, release, or otherwise provide controlled products or technical data contrary to applicable U.S. law.
I understand that U.S. Government authorization may be required before certain items or technical data may be transferred to a foreign destination, foreign person, different end user, or different end use.
If I resell or transfer controlled products, I am responsible for determining and complying with applicable restrictions governing that subsequent transaction.
I understand that violations of U.S. export-control laws may result in significant civil, criminal, and administrative penalties.
Quad Defense May Refuse a Transaction
Quad Defense reserves the right to refuse, cancel, delay, or request additional information regarding any transaction when necessary to evaluate export-control compliance, end use, end user, destination, or other legal requirements.
This may include requesting information sufficient to verify purchaser identity, intended end use, ultimate destination, or other compliance information relevant to the transaction.
Classification & Legal Guidance
Information provided on this page is intended as a general compliance notice and does not constitute legal advice, an export classification, or authorization to export any specific product.
Customers requiring a formal classification or authorization should consult the applicable U.S. Government agency or qualified export-control counsel before proceeding with a transaction.
QDEF COMPLIANCE // QUESTIONS
Questions Before You Order?
If you have questions about whether Quad Defense can fulfill an order to a particular customer, destination, or organization, contact us before placing the order.
Email: sales@quaddefense.com
QDEF COMPLIANCE // U.S. EXPORT CONTROL
Export &
ITAR Compliance
Certain products, components, technical data, and services offered by Quad Defense may be controlled under United States export-control laws and regulations.
These requirements may include the International Traffic in Arms Regulations (ITAR), the Export Administration Regulations (EAR), or other applicable U.S. laws and regulations.
Customers are responsible for understanding and complying with the export-control requirements applicable to the products or information they purchase, receive, transfer, resell, or otherwise provide to others.
Do not export, re-export, transfer, release, or provide controlled products, technical data, or services to a foreign person, foreign destination, or unauthorized end user without first determining whether U.S. Government authorization is required.
This includes transfers that may occur inside the United States when controlled technical data or other controlled items are released to a foreign person.
What Is ITAR?
The International Traffic in Arms Regulations are administered by the U.S. Department of State's Directorate of Defense Trade Controls (DDTC).
ITAR governs defense articles, defense services, and related technical data identified on the United States Munitions List, as well as certain exports, temporary imports, reexports, retransfers, and other controlled transactions.
Not every product sold by Quad Defense is necessarily ITAR-controlled. Export classification depends on the specific product, component, technology, technical data, and transaction.
Night Vision & Related Equipment
Night vision products and related equipment may be subject to U.S. export-control restrictions depending on their classification, configuration, technical characteristics, origin, and intended destination or end user.
Some products may fall under ITAR jurisdiction while others may be controlled under the Export Administration Regulations or another regulatory framework.
The absence of an “ITAR” label on a product page should not be interpreted as confirmation that the product is unrestricted for international transfer.
Who May Receive Controlled Items?
Export-control rules can restrict who may receive certain products, technical data, or defense services.
ITAR distinguishes between U.S. persons and foreign persons. The applicable regulatory definitions should be used when determining whether a particular transfer or release requires authorization.
Citizenship alone should not be used as the sole test for every export-control determination.
Authorization May Be Required
Depending on the item and circumstances, U.S. Government authorization may be required before a controlled product or technical data may be:
- Exported from the United States
- Re-exported from one foreign country to another
- Retransferred to a different end user or end use
- Released or provided to a foreign person
- Sold or transferred to another party for a different destination or purpose
- Used to furnish a controlled defense service
Applicable licenses, agreements, exemptions, exceptions, or other authorizations must be determined before the transaction occurs.
Resale Does Not Remove Export Restrictions
Purchasing a product from Quad Defense and later reselling or transferring it does not eliminate applicable U.S. export-control restrictions.
Customers who resell controlled products are responsible for ensuring that subsequent transfers comply with applicable export-control laws, end-user restrictions, destination restrictions, licensing requirements, and other regulatory obligations.
Where appropriate, downstream purchasers should also be informed that the product may be subject to U.S. export-control restrictions.
Technical Information May Also Be Controlled
Export controls may apply not only to physical hardware but also to certain technical information associated with controlled products.
Depending on its content and classification, controlled technical data may include certain detailed information relating to the design, development, production, manufacture, assembly, operation, repair, testing, maintenance, or modification of controlled defense articles.
Quad Defense may therefore limit the distribution of certain technical information or documentation when necessary to comply with applicable export-control obligations.
Purchaser Acknowledgment
By purchasing or receiving export-controlled products, technical data, or services from Quad Defense, the purchaser acknowledges responsibility for complying with applicable U.S. export-control laws and regulations.
I understand that certain products or technical information provided by Quad Defense may be subject to U.S. export-control laws and regulations.
I will not export, re-export, transfer, release, or otherwise provide controlled products or technical data contrary to applicable U.S. law.
I understand that U.S. Government authorization may be required before certain items or technical data may be transferred to a foreign destination, foreign person, different end user, or different end use.
If I resell or transfer controlled products, I am responsible for determining and complying with applicable restrictions governing that subsequent transaction.
I understand that violations of U.S. export-control laws may result in significant civil, criminal, and administrative penalties.
Quad Defense May Refuse a Transaction
Quad Defense reserves the right to refuse, cancel, delay, or request additional information regarding any transaction when necessary to evaluate export-control compliance, end use, end user, destination, or other legal requirements.
This may include requesting information sufficient to verify purchaser identity, intended end use, ultimate destination, or other compliance information relevant to the transaction.
Classification & Legal Guidance
Information provided on this page is intended as a general compliance notice and does not constitute legal advice, an export classification, or authorization to export any specific product.
Customers requiring a formal classification or authorization should consult the applicable U.S. Government agency or qualified export-control counsel before proceeding with a transaction.
QDEF COMPLIANCE // QUESTIONS
Questions Before You Order?
If you have questions about whether Quad Defense can fulfill an order to a particular customer, destination, or organization, contact us before placing the order.
Email: sales@quaddefense.com
Share

- 5 stars: 4 (80%)
- 4 stars: 1 (20%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
Sick. Makes for good desk ornament or scary Halloweenie decoration. Either way “get you an ole skully boi”- you wont regret it.
Awesome stand. They sent a patch and stickers which were a nice surprise. Only complaint is that the skull mount is clearly 3d printed and the details and filament lines are pretty visible. Not a deal breaker, but not as polished as the preview implies.
Exactly as ordered. Great stand for my helmet to make displaying it in my bedroom a bit more like decor and not just havint it sitting on a shelf.
I have wanted one of these for a while, but didn't know where to find a good seller. Quad Defense was fast, accommodating to my requests, and communicative. The result was a quickly delivered 10/10 product.