SIGHTLINES GEL EAR PADS WITH RELIEF CUT FOR GLASSES

These are upgraded gel ear pads that are the first with our patented concept (U.S. Patent No. 10,841,686 and U.S. Patent D0868025) with relief cuts for glasses to pass through without breaking the noise seal and causing headaches from increased clamping pressure. Our latest design features a rim to slide under the clips on headsets like Impact® Sport and a non-permanent, pressure-sensitive adhesive for a much more secure fit and peel + stick compatibility with snap-in plastic adapter plates (available separately) to fit headsets from dozens of manufacturers.

Best results with straight-style glasses arms, and our super-soft and flexible silicone gel produces an amazing seal with other types of glasses arms.
Our unique horseshoe-ring shaped, grooved front face and 1/4" inch of silicone gel provide significantly better softness and sealing vs. competitors' pads. 
When headset is lowered as much as possible, glasses arms can be dropped into relief cuts and will sit in a protected channel just above the ear. Using the relief cuts is completely optional. Our gel pads work like normal pads when glasses are not in use.
Use of super-premium acoustic memory foam and allowing for a closed head seal leads to impressively better sound deadening.
Designed by a Marine Corps combat veteran, made in the USA, and designed for use in any climate. Polyurethane outer skin is UV-resistant, waterproof, and much longer-lasting than vinyl used on cheap pads. These gel pads are tough. Plus, we warranty our pads for an entire year, regardless of what continent or climate you operated in.

This Sightlines gel ear pad model is fully compatible with many Howard Leight®, Peltor™, and Ops-Core™ headsets without any adapter plates. The adhesive is non-permanent and pads can be removed dozens of times, or even swapped between headsets, without degrading the bonding strength. With our adapter plates, you can use these same pads on an even wider selection of headsets. We use the same type of adhesive that is used on military headsets to hold pads in place. There is an outer lip on this pad that slides under the Howard Leight® headset retaining clips and provides a secondary method to secure the pads. 

This model is also compatible with any headset that utilizes oval pads that are 4" tall x 3" wide and allow users to peel off / remove their original pads and apply new adhesive-backed pads.

SIGHTLINES STANDARD / UNIVERSAL GEL EAR PADS w/ PRESSURE-SENSITIVE ADHESIVE BACKING

COMPATIBLE HEADSETS WITH NO ADDITIONAL ADAPTER PLATES NEEDED:

This Sightlines gel ear pad model is fully compatible with many Howard Leight®, Peltor™, and Ops-Core™ headsets without any adapter plates. The adhesive is non-permanent and pads can be removed dozens of times, or even swapped between headsets, without degrading the bonding strength. With our adapter plates, you can use these same pads on an even wider selection of headsets. We use the same type of adhesive that is used on military headsets to hold pads in place. There is an outer lip on this pad that slides under the Howard Leight® headset retaining clips and provides a secondary method to secure the pads. Please see our INSTALL page for more details.
-
This model is also compatible with any headset that utilizes oval pads that are 4" tall x 3" wide and allow users to peel off / remove their original pads and apply new adhesive-backed pads. Our gel ear pads are 0.625" thick.
-

• 3M WorkTunes Wireless / Bluetooth model (please additionally purchase our PL200 Peltor HY79+ HY80 cloned adapter plates if you own the old-style WorkTunes headset that only has an AM/FM radio)
• 3M Peltor RangeGuard
• 3M Peltor Sport Tactical 100 / 300 / 500
• Awesafe GF01
• Axil / Sportear Trackr (Including BLU)
• Caldwell E-Max (standard and low-profile)
• GLORYFIRE M8056T
• Howard Leight Impact Sport (including Bolt version)
• Howard Leight Impact Pro
• Howard Leight Leightning
• Howard Leight Sync
• Howard Leight Verishield
• Howard Leight Viking
• ISOtunes LINK 1.0, LINK 2.0, LINK Aware, DEFY
• Kask SC1 / SC2 / SC3
• Mpow Noise Reduction Safety Ear Muffs
• NoiseBuster PA4000, PA4100, and PA4200
• Ops-Core AMP (note: outer lip may overlap and can be removed with knife scissors, but this is only an aesthetic issue)
• Otto NoizeBarrier Range SA and TAC
• Peltor RangeGuard and Peltor Sport Tactical 100 / 300 / 500
• Pro Ears - multiple models compatible; customer must verify that their original pads can be peeled off and our oval 3 x 4" pads can be glued on
• Radians - multiple models compatible; customer must verify that their original pads can be peeled off and our oval 3 x 4" pads can be glued on
• Savior Equipment Apollo - (existing pads can be peeled off the existing plastic plate and residue cleaned up, and new pads can be applied, but we instead recommend additionally purchasing our WG200 Sightlines Adapter Plates for Savior Apollo and similar headsets due to the improvement in secure mounting) TR Industrial Forestry Safety Helmet and Hearing Protection System
• Walker's Game Ear FireMax (requires cutting off original pads and reusing the factory-installed plastic plates)
• Walker's Game Ear Recon (requires cutting off original pads and reusing the factory-installed plastic plates)
• Winchester Passive Folding Earmuffs / Low Pro Passive Folding Earmuffs

ADAPTERS

WG200

SNAP-IN PLASTIC ADAPTER PLATES for most SAVIOR EQUIPMENT AND WALKER'S GAME EAR HEADSETS 

COMPATIBLE HEADSETS:

• Savior Equipment Apollo
• Walker's Game Ear Razor Series (including SLIM and COMM BT and PATRIOT model but excluding the COMPACT version of the series)
• Walker's Game Ear Ultimate Power Muff (including Alpha and Quad version)
• Walker's Game Ear Ultimate Quad Connect
• Walker's Game Ear Ultimate Digital Quad Connect
• Walker's Game Ear Ultimate Digital Quad 4x4
• Walker's Game Ear XCEL
• ACTFIRE Safety Earmuffs (clone of Razor headset)

---------------------------------------------------------

MS200 

SNAP-IN PLASTIC ADAPTER PLATES for most INVISIO / SORDIN / SAFARILAND/TCI / SWATCOM HEADSETS

COMPATIBLE HEADSETS:

• Invisio T5 and T7  (please transfer o-ring from original snap-in plates onto our plates if applicable)
• Sordin Supreme including all variants like Pro X (please transfer o-ring from original snap-in plates onto our plates if applicable)
• Safariland / TCI Liberator / DEHP / HP (please transfer o-ring from original snap-in plates onto our plates if applicable)

---------------------------------------------------------

PL200

SNAP-IN PLASTIC ADAPTER PLATES for most PELTOR TACTICAL HEADSETS -- SAME SHAPE AS HY79 / HY80

COMPATIBLE HEADSETS:

If your headset is not listed below but is compatible with the HY79 or HY80 hygiene kit, then it is guaranteed compatible with our model.

OUR MOUNTING PLATE THAT IS THE SAME SHAPE AS PELTOR HY79/HY80  DOES NOT FIT RANGEGUARD, SPORT TACTICAL 100 / SPORT TACTICAL 300 / SPORT TACTICAL 500, OR THE WORKTUNES WIRELESS / BLUETOOTH MODEL. PELTOR MADE A NEW ADAPTER PLATE THAT LOOKS SIMILAR TO THIS ONE BUT IS NOT THE SAME SIZE. FORTUNATELY, PELTOR CHOSE TO MOUNT THEIR PADS TO THE UNDERLYING PLASTIC MOUNTING PLATES USING ADHESIVE, SO YOU CAN PEEL THE FOAM PADS OFF (IT TAKES FIVE SECONDS), CLEAN OFF ANY RESIDUE, AND THEN ADD OUR STANDARD / UNIVERSAL ADHESIVE-BACKED PADS TO THAT UNDERLYING PLASTIC MOUNTING PLATE.

• 3M Worktunes AM / FM (original model only, not Wireless / Bluetooth model; please read warning above and instead just order our Standard / Universal Mount pads with adhesive backing if you have the Wireless / Bluetooth model)
• 3M Peltor ComTac
• 3M Peltor ProTac
• 3M Peltor Shotgunner
• 3M Peltor Sound-Trap
• 3M Peltor SportTac
• 3M Peltor SWAT-Tac II / III
• 3M Peltor Tactical 6-S
• 3M Peltor TacticalPro
• 3M Peltor Tactical Sport
• Racing Electronics® Platinum Plus headseTS
  

---------------------------------------------------------

PM200

SNAP-IN PLASTIC ADAPTER PLATES for most PELTOR™ OPTIME™ MODELS

COMPATIBLE HEADSETS:

If your headset is not listed below but is compatible with the HY10 hygiene kit, then it is guaranteed compatible with our model.

• 3M Peltor 95 / 98 / 101 / 105 / III and Professional Model

---------------------------------------------------------

MATERIALS & DURABILITY:

Sightlines pads are manufactured with only premium components. They are designed to survive in nearly every environment on earth. As military veterans, we understand that gear dependability is crucial.

Internally, both silicone gel and sound-deadening memory foam provide the ultimate in softness. The silicone gel's flexibility is amazingly similar from -100F to +300F (-70C to 150C). The sound-deadening memory foam meets FAR 25.853 flammability requirements for U.S. aviation use.

Externally, an ultra-thin sheet of rugged polyurethane provides a supple outer skin. The polymer skin is resistant to UV rays, has antifungal properties, and does not absorb moisture and quickly degrade like cheaper materials.

Our product should last for several years of normal use instead of degrading quickly like faux leather or vinyl pads. Be sure to regularly clean the outer surface with soapy water as necessary, but do not submerge, as the pads have a pinhole-sized air vent on the bottom to allow proper functioning.

WARRANTY: Sightlines ear pads are warranted to be free from defects in material and workmanship for one (1) year from date of purchase. Any defects will be remedied without charge within a reasonable time after notification. The warranty does not cover intentional product abuse.